MAWELD / Selection guide
Welding tables – 16 mm system, 100 mm hole spacing
Wider hole spacing for assemblies whose supports can be arranged on a less dense grid. Compare its application with 50 mm spacing.
View welding tables with 100 mm hole spacing ↗For assemblies suited to wider hole spacing
A 100 mm grid may suit frames and longer section assemblies when the required supports and stops can be positioned on the less dense grid. When choosing, first determine the part's reference edge, support points and access to joints. Only then assess whether hole spacing suits your fixture.
Wider spacing does not automatically mean a higher load capacity or different plate thickness. It describes the geometry of the hole grid. For heavy assemblies, follow the specific model's data and confirmed permissible load, rather than the grid name.
When to consider 50 mm hole spacing
If small parts repeatedly lack a hole near a necessary stop, the denser 50 mm grid may be more suitable. Check the same issue using the actual accessories: some fixtures allow position adjustment, but their range cannot be assumed without technical data.
For repeated production of one assembly, a fixed setup on a 100 mm grid may be sufficient. For frequent part changes, also consider changeover time. Comparison should be based on the specific work rather than an assumption that one grid is universally better.
16 mm system, plate and working height
The verified tables use a 16 mm clamping system. Distinguish this from plate thickness: the published versions use 6 mm S355 steel. Legs made from 80 × 80 mm sections have a specified working height adjustment range of 870 to 1 000 mm. Before ordering, check the technical description of the selected variant.
Adapt working height to the operator and assembly height above the top. Clean support surfaces and stable installation are prerequisites for organised work. Neither the S355 designation nor plate thickness alone specifies the permissible load of the complete table; request this information for demanding applications.
Size and accessories belong to the same decision
The range includes formats such as 1000 × 1000, 1200 × 1000, 1600 × 1000, 2000 × 1000 and 2400 × 1200 mm. Fixtures may require more space than the product footprint alone suggests. Also allow for access to edges and handling when placing material.
Use stops, angle brackets and clamps intended for the 16 mm system, and check their attachment to the selected top. A good fixture should support and secure the assembly without unnecessarily restricting weld access. Mateos.sk displays purchasing variants and current delivery conditions.
Choose a specific version
MAWELD explains the technical considerations behind your choice. Find current variants and purchase options in the relevant Mateos category.
View welding tables with 100 mm hole spacing ↗